top of page
This site was designed with the
.com
website builder. Create your website today.Start Now

PUBLICATIONS

Book Published

  1. "Manufacturing Technology I" authored by Dr.S.Gowri, Dr.P.Hariharan, Dr.A.Suresh Babu and published by Pearson Education, Chennai.(2008) ISBN: 8131710238, 9788131710234

  2. "Manufacturing Technology Vol 1" authored by S.Gowri and A.Suresh babu and published by Oxford University Press, Newdelhi.(2019)

Book Chapters Published

  1. V. Muthukumar, R. Venkatasamy , V. Mariselvam ,A. Suresh babu, N. Senthilkumar, A. Antony George fernando, " Comparative investigation on Mechanical properties of Natural fiber reinforced polyester composites", Applied Mechanics and Materials, published by Trans Tech Publications. Vol. 592, Issue 2014, pp. 92-96 (2014).https://doi.org/10.4028/www.scientific.net/amm.592-594.92 

  2. N.E. Arun Kumar, A. Suresh Babu, V. Muthu Kumar, " Parametric Study along with Selection ofOptimal Solutions in Wire Cut Machining of Titanium (Gr2)", Advanced Materials Research, published by TransTech publications. Vol. 984, Issue 2014, pp. 37-41 (2014).https://doi.org/10.4028/www.scientific.net/amr.984-985.37 

  3. S. Dhanalakshmi, M. Jaivignesh, A. Suresh Babu and K. Shanmuga Sundaram, "Microstructural and Mechanical Behaviour of Aluminium Matrix Composites Reinforced with Coated SiC Particles Fabricated by Stir Casting", Applied Mechanics and Materials, published by Transtech Publications. pp. 301-307 (2015).https://doi.org/10.4028/www.scientific.net/amm.766-767.301 

  4. M. Athimoolam, Logeshkumar, Suresh Babu A, T.V. Moorthy, "Tensile Behaviour of Nanoparticle Reinforced Epoxy-Polyurethane Composite Water Pipeline", Applied Mechanics and Materials,published by Trans Tech Publications. Vol. 813, pp. 127-134 (2015).https://doi.org/10.4028/www.scientific.net/amm.813-814.127 

  5. Arivukkarasan S., Stalin B., Suresh Babu A., Pandiyarajan M, (2019)"Analysis on Mechanical Behaviour of Binary and Hybrid Al2014 Metal Matrix Composites", In: Hiremath S., Shanmugam N., Bapu B. (eds) Advances in Manufacturing Technology.Lecture Notes in Mechanical Engineering, published by Springer, Singapore. pp. 319-325 .Print ISBN:978-981-13-6373-3, Online ISBN:978-981-13-6374-0

  6. Suresh Babu A., Jaivignesh M., Poovarasan D.,( 2019) "Mechanical and Crystallization Behaviour of Sisal Fiber and Talc Reinforced Polylactic Acid Composites", Advances in Unconventional Machining and Composites ,Lecture Notes on Multidisciplinary Industrial Engineering, published by Springer, Singapore. pp. 749-756 .ISSN: 2522-5022

Journal Publications

  1. N.E. Arun Kumar, M. Ganesh, A. Suresh Babu & R. Elakkiyadasan (2023) Effect of Cryo-treatment of wires on machining performance of WEDM, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2023.2217897

  2. Raja,Velusamy; Suresh Babu, A ; Swaminathan, M R; Hariharan, P.(2023), "Evaluation of Mechanical, Tribological, and Thermal Characterization of GZ TBCs for Heavy Duty Diesel Engine Application" ,Journal of Materials Engineering and Performance, IF: 2.099(2021) Received 06-Jan-2023, Revised   2023,Accepted  2023,Published   2023, Journal ISSN: ISSN: 1059-9495 (print); 1544-1024 (web), Springer.

  3. N.E Arun Kumar,M Subramanian,A Suresh Babu, R Elakkiyadasan (2023),"Performance evaluation of cryogenic treated and untreated brass electrode in wire-EDM", Materials and Manufacturing Processes,Vol. 38 (7),   pp. 816-827   Received 12 Jun 2022, Accepted 27 Dec 2022, Published online: 18 Jan 2023, ISSN:1042-6914E-ISSN:1532-2475, IF: 6.7(2022), DOI:https://doi.org/10.1080/10426914.2023.2165664.

  4. C Devanathan, A Suresh Babu, S Senthil Murugan, E Shankar, R Giri (2022) ,"Review of Joining Various Materials by FSW Process and Applications",  Annals of “Dunarea de Jos” University of Galati. Fascicle XII, Welding Equipment and Technology Vol.33 pp.75-88 Received 22 Sep 2022  Accepted 15 Dec 2022 Published online: 15 Dec 2022, ISSN print: 1221-4639, ISSN online:2668-616, IF: 0.58(2022),DOI: https://doi.org/10.35219/awet.2022.06

  5. Arunkumar.N.E, Suresh babu A,Subramanian M, Arunkumar N (2022),"Influence of MQL on performance evaluation of EN19 steel under centreless grinding", Materials and Manufacturing Processes , Published by Taylor and Francis ,Vol.37,No.14, pp.1618-1629,DOI: . DOI:https://doi.org/10.1080/10426914.2022.2032142. Received 07 Nov 2021, Accepted 06 Jan 2022, Published online: 06 Feb 2022,ISSN:1042-6914E-ISSN:1532-2475 IF:6.7(2022)

  6. Mahalingam, S., Suresh babu A.(2022) Characterization of 3-Aminopropyltriethoxysilane Treated Stacked Silicate Nanoclay and Red Matta-RHA Biosilica Woven Ramie Fibre Epoxy Composite. Silicon, Vol.14, pp.8129–8139, Received 24 September 2021,Accepted 11 November 2021,Published 07 January 2022, Issue Date August 2022.IF:2.941(2021), Electronic ISSN 1876-9918 , Print ISSN 1876-990X, DOI:https://doi.org/10.1007/s12633-021-01549-8

  7. Arunkumar.N.E, Suresh babu A,Subramanian M, Pradeep Kumar C (2022),"Influence of Wire-EDM parameters on surface characteristics of superalloy Monel 400"  Surface Review and Letters ,Vol. 29, No. 03, 2250031(1-9), Received 1 June 2021,Revised 18 November 2021,Accepted 19 November 2021,Published 4 January 2022, IF: 1.152 (2023), DOI:https://doi.org/10.1142/S0218625X22500317

  8. Devanathan C, Suresh Babu A(2021),"Multi Objective Optimization of Process Parameters by Firefly Algorithm during the Friction Stir Welding of Metal Matrix Composites", Transactions of FAMENA, Vol.45 (1),pp. 117-128, ISSN 1333-1124 eISSN 1849-1391, Submitted: 08.5.2020 Accepted: 11.01.2021,IF:0.743(2023), DOI: https://doi.org/10.21278/TOF.451018520

  9. M Jaivignesh , A Suresh Babu , G Arumaikkannu(2021),"A study on compressive behaviour and biocompatibility of direct metal laser sintered Ti64 cellular structures",Material Research Express, IOP Publishing,Vol.8, pp.1-14.,Received 23 September 2020,Revised 21 January 2021, Accepted 3 February 2021, Published 19 February 2021. IF:1.941, DOI: https://doi.org/10.1088/2053-1591/abe2d4

  10. Jaivignesh M. Suresh Babu A. Arumaikkannu G., "In-vitro Analysis of Titanium Cellular Structures Fabricated by Direct Metal Laser Sintering", Materials Today: Proceedings , published by Elsevier. Vol. 22, Issue 4, pp. 2372-2377 (2020).https://doi.org/10.1016/j.matpr.2020.03.360

  11. A. Suresh Babu , M. Jaivignesh, S. Srinivasan , M. Sugavaneswaran, "Design of Functional Gradient Porous Structure and its Fabrication using DMLS Process ", Materials Today: Proceedings , published by Elsevier. Vol. 24, pp. 1561-1569 (2020).https://doi.org/10.1016/j.matpr.2020.04.476

  12. Devanathan C.,Suresh Babu A.,Giri R., Azad A,"Predicting the Tensile Strength of Metal Matrix Composites Joined by Friction Stir Welding and Optimization of Parameters using Firefly Algorithm".,Journal of the Chinese Society of Mechanical Engineers ,Vol.41,Issue 4, pp.513 - 520(2020),DOI:10.29979/JCSME

  13. Devanathan C. Suresh Babu A, " Friction stir welding capabilities and their applications-Review", Solid State Technology,published by IFERP. pp. 111-131 (2020).

  14. Jacob Moses A., , Suresh Babu A. , Ananda Kumar S.,"Analysis of physical properties and wear behavior of phenol formaldehyde - Basalt fiber reinforced brake pad",published by Elsevier. Vol. 33, Part 1, pp. 1128-1132 (2020).https://doi.org/10.1016/j.matpr.2020.07.228

  15. Arunkumar.N.E, Suresh babu A, Pradeep Kumar C, Sathis Kumar, "Influence of near-dry ambiance on WEDM of Monel super alloy", Materials and Manufacturing Processes , Published by Taylor and Francis .pp. 827-835 (2020) DOI: 10.1080/10426914.2020.1866191,ISSN:1042-6914E-ISSN:1532-2475 IF:6.7(2022)

  16. Saravanan R., Suresh Babu A., " Experimental Novel Investigation of Electrostatic Charged Multi Walled Carbon Nanotubes Reinforced Epoxy Based Polymer Composite", Journal of Polymer Materials , Vol. 37, Issue 1, pp. 43-54 (2020). DOI: 10.32381/JPM.2020.37.01.4

  17. Devanathan C., Suresh Babu A., Haribabu B,Shankar E, "Surface Composites Preparation of Al5052 Reinforced with Al2O3 by Friction Stir Processing", International Journal of Recent Technology and Engineering (IJRTE), published by Blue Eyes Intelligence Engineering & Sciences Pub. Vol. 8, Issue 2, pp. 3979-3983 (2019).https://doi.org/10.35940/ijrte.b2897.078219 

  18. Devanathan C,Suresh Babu A,Shankar.E, "Friction Stir Welding of Aluminum alloys using Coated and Non Coated Tool ", Materials Today: Proceedings , published by Elsevier. Vol. 16, Part 2, pp. 889-896 (2019).https://doi.org/10.1016/j.matpr.2019.05.174

  19. Jaivignesh M, Suresh Babu A, Dhanalakshmi S, Shanmuga Sundaram K, "Evaluation of Mechanical Properties of Al (2014)-Nickel Coated SiC Composites Subjected to Equal Channel Angular Pressing ", Journal of Advanced Microscopy Research (JAMR), published by American Scientific Publishers. Vol. 13, pp. 282-292 (2018).https://doi.org/10.1166/jamr.2018.1391 

  20. Suresh Babu A. , Binish K. M. , Jaivignesh M., Sugavaneswaran M.,"Modelling of Functional Gradient Porous Structure and its Fabrication using Additive Manufacturing Process" ,Materials Today: Proceedings Vol.5,Issue 11 , pp.24558–24567,(2018).https://doi.org/10.1016/j.matpr.2018.10.253

  21. Suresh Babu A., Jaivignesh M. , Vishal R., Jagatheeson B., Gokul Chandra Kumar R.,"Evaluation of Grain size and Hardness of Equal Channel Angular Pressed Al (2014)-SiC-Al2O3 Metal Matrix Composites",International Innovative Research Journal of Engineering and Technology,Vol.4,pp.8-11,(2018).

  22. Suresh Babu A. , Jaivignesh M., Anbarasu M.,"Wear and Corrosion Behaviour of Aluminium 6061 Hybrid Metal Matrix Composite",International Innovative Research Journal of Engineering and Technology, vol.4, 12-17(2018)

  23. Jaivignesh M, Suresh Babu A., Arumaikkannu G"Effect of Pore Orientation on Flexural Strength of Ti64 Cellular 44-50 Structures Fabricated by DMLS Process for Mandibular Implant", Additive Manufacturing Journal, published by Additive Manufacturing Society of India . Vol. 1, Issue 2, pp. 44-50 (2018).

  24. Suresh Babu A, Gowthamraj S and Jaivignesh M, "A Comparative Study on Mechanical Properties of Kenaf Fiber-Reinforced Polyester Composites Prepared by VARI, RTM and CM Techniques", IOP Conference Series: Materials Science and Engineering, published by IOP Publishing Ltd. Vol. 577, Issue 1, pp. 1-9 (2019).doi:10.1088/1757-899X/577/1/012189

  25. N E Arunkumar, A.Suresh babu(2018). " Influence of Input Parameters in Enhancing the Machinability of Monel Alloy using Near- Dry WEDM", Materials and Manufacturing Processes, published by Taylor & Francis.Vol.33 ,Issue 1, 85-92 https://doi.org/10.1080/10426914.2017.1279297,SSN:1042-6914E-ISSN:1532-2475 IF:6.7(2022)

  26. Suresh Babu A. , Nagarajan T.T., Palanivelu K. Nayak S.K.(2018) "Mechanical and thermal properties of epoxy composites reinforced with carbon and pineapple leaf fiber", Journal of Polymer Materials, published by Print Publications.Vol. 35, Issue 1, pp. 61-71 .10.32381/JPM.2018.35.01.5

  27. Suresh Babu A. Jaivignesh M, Dhinakaran S, Vengatesan S., Vimal Prakash C, Divakaran Ramasamy R,"Effect of Equal Channel Angular Pressing on Microstructure and Hardness of Al (2014) – Nickel Coated Alumina Composites",Materials Today: Proceedings, Vol.5, Issue 2, Part 2,pp.6821–6830(2018).https://doi.org/10.1016/j.matpr.2017.11.342

  28. Nagarajan T.T., Suresh Babu A., Palanivelu K, Nayak S.K., "Mechanical and Thermal Properties of PALF Reinforced Epoxy Composites", Macromolecular Symposia, published by John Wiley & Sons. Vol. 361, Issue 1, pp. 57-63 (2016). https://doi.org/10.1002/masy.201400256 

  29. N. E. Arun Kumar,A. Suresh Babu , D. Murali, "A study on parametric optimization of wire Electrical discharge machining using response Surface methodology", International Journal of Chemical Sciences, published by sadgurupublications. Vol. 14, Issue 2, pp. 1051-1059 (2016).

  30. Athimoolam M, Moorthy T V, Suresh babu A, " Empirical modelling and Experimental Investigation of the Amine treated Nanoclay Reinforced Epoxy -Polythene Blended Resin Composites", Polymer and Polymer composites, published by SAGE publishing. Vol. 24, Issue 7, pp. 539-546 (2016).https://doi.org/10.1177/096739111602400713 

  31. R.Saravanan,A. Suresh Babu, and T.Maridurai, " Influence of Surface modified MWCNT on Mechanical and Thermal Properties of Carbon Fiber/Epoxy Resin Hybrid Nanocomposite", Digest Journal of Nanomaterials and Biostructures, published by National Institute of Materials Physics, ROMANIA. Vol. 11, Issue 4, pp. 1303-1309 (2016).

  32. Logesh Kumar, Athimoolam M, Moorthy T V, Suresh babu A,"Compression Test on Epoxy-Polyurethane Blended Resin, with Nanoclay Reinforced Composite Pipeline and Finite Element Analysis",Indian Journal of Science and Technology Vol.9 , Issue S1,pp. 1-6(2016).https://doi.org/10.17485/ijst/2016/v9is1/108464

  33. Saravanan M., Suresh Babu A, "Parametric optimization of increasing corner accuracy in WEDM on Inconel 625", Journal of Chemical and Pharmaceutical Sciences, pp. 443-447(2015).

  34. Ajith Damodaran, Larry Lessard, Suresh Babu A, "An Overview of Fibre-Reinforced Composites for Musical Instrument Soundboards", Acoustic Australia, published by Springer. Vol. 43, Issue1, pp. 117-122 (2015).https://doi.org/10.1007/s40857-015-0008-5 

  35. Selwyn Jebadurai D,Suresh Babu A, " Influence of functionalized multi-walled carbon nanotubes on mechanical properties of glass fiber reinforced polyester composites", Indian Journal of Engineering & Materials Sciences, published by NISCAIR in association with the Indian National S. Vol. 22, pp. 167-174 (2015).http://nopr.niscair.res.in/handle/123456789/31503

  36. Ajith Damodaran, Hossein Mansour, Larry Lessard, Gary Scavone, A. Suresh Babu,"Application of composite materials to the chenda, an Indian percussion instrument", Applied Acoustics, published by Elsevier. Vol. 88, pp. 1-5 (2015).https://doi.org/10.1016/j.apacoust.2014.07.013 

  37. V. Muthukumar, A. Suresh Babu, R. Venkatasamy, N. Senthil Kumar, " An Accelerated Particle Swarm Optimization Algorithm on Parametric Optimization of WEDM of Die-Steel", Journal of the Institution of Engineers (India): Series C, published by Springer International Publishing AG. Vol. 96, Issue 1, pp. 49-56 (2015).https://doi.org/10.1007/s40032-014-0143-z

  38. A.Suresh Babu, N.E.Arun Kumar, S .Chandramouli, "Multi-Objective Optimization Of Wire Electrical Discharge Machining Using Principal Component Analysis", International Journal of Applied Engineering Research (IJAER), published by Research India Publications. Vol. 10,Issue 2, pp. 1739-1742 (2015).

  39. C.Devanathan, A.Suresh Babu, Dominic Roystan, M.S.Balaguru, " Effect of Tool Rotational Speed on Mechanical Properties of Aluminium Matrix composites Welded by Friction Stir Welding", International Journal of Applied Engineering Research, published by Research India Publications. Vol. 10, Issue 55, pp. 3850-3854 (2015).

  40. Rama Manivannan, A. Suresh Babu, "Influence Of Trapezoidal Shear Keys On The Mechanical Properties Of PVC Foam Cored Sandwich Composite Marine Structure", International Journal of Applied Engineering Research, published by Research India Publications. Vol. 9, Issue 26,pp. 9349-9352 (2014).

  41. N.E.Arunkumar, A.Suresh babu, " Modelling The Process Parameters Of Wire ElectricalDischarge Machining Of Zirconium Copper Alloy Using RSM", International Journal of AppliedEngineering Research, published by Research India Publications. Vol. 9, Issue 26, pp.8956-8958 (2014).

  42. D. Veenaraja, V. Muthukumar,R. Venkatasamy, M.Dharmendhirakumar, A.Suresh babu,A.Antony George fernando, "Surface Roughness Analysis And Optimizationof EDM MachiningParameters In Machining Al/SiC MMC by Taguchi Method", International Journal of AppliedEngineering Research, published by Research India Publications. Vol. 9, Issue 26, pp.9386-9389 (2014).

  43. R. Kalyan Kumar, A. Suresh Babu, " Finite element analysis and experimental study on metal joining by mechanical crimping", International Journal of Service and Computing Oriented Manufacturing, published by Interscience. Vol. 1, Issue 4, pp. 295-306 (2014).https://doi.org/10.1504/ijscom.2014.066489 

  44. V. Muthukumar, N. Rajesh, R. Venkatasamy, A. Sureshbabu, N. Senthilkumar, " Mathematical Modeling for Radial Overcut on Electrical Discharge Machining of Incoloy 800 by Response Surface Methodology", Procedia Materials Science, published by Elsevier. Vol. 6, pp. 1674-1682 (2014).https://doi.org/10.1016/j.mspro.2014.07.153 

  45. C.Devanathan, A.Suresh babu, "Friction Stir Welding of Metal Matrix Composite Using Coated Tool", Procedia Materials Science, published by Elsevier. Vol. 6, pp. 1470-1475 (2014).https://doi.org/10.1016/j.mspro.2014.07.126 .

  46. Devanathan C , Murugan A and Suresh babu A, "Optimization of process parameters in frictionstir Welding of Al 6063", International journal of design and manufacturing technology(IJDMT),Vol. 4, Issue 2, pp. 42-48 (2013).

  47. Suresh babu A and Devanathan C, " An Overview of Friction Stir Welding", International Journal of research In Mechanical engineering & technology(IJRMET), Vol. 3, Issue 2, pp.259-265 (2013).

  48. Arivukkarasan , Dhanalakshmi V, Aruna , Suresh babu A, "Performance Study on Fatigue Behaviour in Aluminium Alloy and Alumina Silicate Particulate Composites", Journal of Applied Science and Engineering(Tamkang Journal of Science and Engineering (TKJSE)), Vol. 16, Issue 2, pp. 127-134 (2013).https://doi.org/10.6180/jase.2013.16.2.03.

  49. Muthukumar V, Venkatasamy R, Suresh babu A, Arunkumar D, "A Study on Mechanical Properties of Natural Fiber Reinforced Laminates of Epoxy (LY 556) Polymer Matrix Composites", International Journal of Production Technology and Management Research , Vol.2, Issue 2, pp. 67-72 (2011).

  50. Muthukumar V, Suresh Babu A, Venkatasamy R, Raajenthiran M, " Process Optimization ofWire-EDM parameters by Grey Relational Analysis based Taguchi method", Curie, publishedby Bits Bilani. Vol. 3, Issue 3, pp. 1-10 (2011).

  51. Muthukumar V, Venkatasamy R, Suresh babu A, Jagan K, Nithin K, "Wear Characteristic of Al Alloy (LM4) – SiC Particulate Reinforced MMC", International Journal of Production Technology and Management Research, Issue 1, pp. 49-54 (2011).

  52. Muthu Kumar V, Suresh babu A, Venkatasamy R, Raajenthiran M, "Optimization of the WEDM Parameters on Machining Incoloy800 Super alloy with Multiple Quality Characteristics", International Journal of Engineering Science and Technology(IJEST) , Vol. 2, Issue 6, pp.1538-1547 (2010).

  53. Muthu Kumar V, Suresh babu A, Venkatasamy R, Raajenthiran M, "Parametric Optimization Of Wire-Cut EDM Process Using Grey Based Taguchi Method For Machining Titanium Alloy (Ti-6Al-4V)", International Journal of Multidisciplinary Research and Advances in Engineering, published by Ascend Publication House. Vol. 2, pp. 77-92 (2010).

  54. Muthukumar V, Suresh Babu A, Venkatasamy R, Raajenthiran M, "Multi response optimization of machining parameters of Wire-EDM using grey relational analysis in the Taguchi method", International Journal of Applied Engineering Research, published by Research India Publications. Vol. 5, Issue 13, pp. 2325-2338 (2010).

  55. Suresh babu A, Jayabalan V, "Statistical Analysis of the Fracture Strengths of Aluminum Alloy -Alumina (Al2O3) Particulate Composites", Journal of Materials Science, published by Springerlink . Vol. 45, Issue 24, pp. 6586-6592 (2010).https://doi.org/10.1007/s10853-010-4747-2.

  56. Suresh babu A , Jayabalan V, " Weibull probability model for Fracture Strength of Aluminium(1101)-Alumina Particle Reinforced Metal Matrix Composite", Journal of Materials Science &Technology(JMST) ISSN: 1005-0302 ( IF: ), published by Chineese Society for Metals. Vol. 25,Issue 3, pp. 343-345 (2009).

  57. Suresh babu A, Jayabalan V, " Statistical analysis of Fracture strength using Weibull distribution in Aluminum – Alumina (Al2O3) particulate composites", Journal of ManufacturingTechnology Today, published by CMTI, Bangalore. Vol. 8, Issue 6, pp. 21-26 (2009).

  58. Chandrasekar M, P.Hariharan, Suresh babu A,Renganarayanan S, Rajadurai A, Mohanlal D,"Optimization of Heat Treatment Factors for improved Wear Resistance and Impact Strength ofSAE 51100 Bearing Steel using Taguchi Techniques", Journal of Manufacturing TechnologyToday, published by CMTI, Bangalore. Vol. 5, Issue 4, pp. 15-19 (2006).

  59. Rathnakumari GN, Hariharan P, Suresh babu A, Rajadurai A, Renganarayanan S, Mohanlal D, "Optimization of heat treatment factors for improved wear resistance and Impact strength of bearing steel using L16 orthogonal array", Journal of Manufacturing Engineering(JME), Vol. 1,Issue 1, pp. 45-50 (2006).

International Conferences

 

  1. Girish nair, G.Arumaikkannu, Suresh babu A, "Improving the effectiveness of Brakes in Two wheelers" presented in a International level conference on TEAM TECH, organised by IISc, Bangalore, Karnataka, India from 02-Nov-2004 to 04-Nov-2004.

  2. M.A.Devasenapathi, M.Omkumar, A.Sureshbabu, "Nanotechnology – The road to Oz" presented in a International level conference on IX Annual International SOM Conference, organised by Pondicherry University, Pondicherry, India from 16-Dec-2005 to 18-Dec-2005.

  3. S.Guhan,M.Omkumar,A.Suresh babu, "Optimizing the method of selection of TransportVehicles in a Supply Chain using Genetic Algorithms" presented in a International level conference on X Annual International SOM Conference, organised by IIM, Ahmedabad, India from 21-Dec-2006 to 23-Dec-2006.

  4. Ramesh, Suresh babu A, "Aluminum matrix composites with controlled non uniform distributionof ceramic reinforcement(Best Paper in the Session)" presented in a International level conference on COSMET 2007, organised by Andhra University,Vishakapatnam, India from21-Mar-2007 to 22-Mar-2007.

  5. M.Ramamoorthy, P.Hariharan, A.Suresh babu, "Laser cutting of AISI 301 steel plate:optimization of Process parameters on surface roughness and slope of the cutting edge" presented in a International level conference on ICADM– 2007, organised by Sethu Institute of Technology Madurai, India from 09-Aug-2007 to 11-Aug-2007.

  6. V. Suresh kumar, P.Hariharan, A.Rajadurai, A.Suresh babu, "Multi response optimization of CNC wire electrical discharge machining of 316 LN stainless steel using Taguchi Method" presented in a International level conference on ICADM– 2007, organised by Sethu Institute of Technology Madurai, India from 09-Aug-2007 to 11-Aug-2007.

  7. S.Suresh, Suresh babu A, M.Omkumar,C.Sivasankaran, "Study on Heat Treatment Parameters of Austempered Ductile Iron" presented in a International level conference onICADM –2007, organised by Sethu Institute of Technology, Madurai., india from 09-Aug-2007to 11-Aug-2007.

  8. V.Sundaram , A.Suresh babu, S.Venugopal, "The formation of Chromium Nitride precipitation on stainless steel to reduce wear characteristics" presented in a International level conference on ICADM – 2007, organised by Sethu Institute of Technology Madurai ., India from09-Aug-2007 to 11-Aug-2011.

  9. R.Saravanan, M.Omkumar, A.Suresh babu, "Performance Evaluation of dispatch rules at intermeidate queues in parallel hybrid flow shop scheduling problem" presented in a International level conference on ICAIEA2010, organised by Anna University, India from 06-Jan-2010 to 08-Jan-2010.

  10. Jothi Ayyappan MS, Suthagar S, Suresh babu A, "Multi Response optimization of wire ED machining Parameters of Al-MMC composites using Taguchi method and grey relational analysis" presented in a International level conference on AIMTDR2010, organised by Andhra University College of Engineering, Vishakapattinam, India from 13-Dec-2010 to 15-Dec-2010.

  11. Muthu Kumar V, Suresh Babu A, Venkatasamy R and Raajenthiren M, "Modeling and optimization of incoloy 800 on machining of WEDM process" presented in a International level conference on APM 2011, organised by CIPET, Chennai , India from 25-Mar-2011 to27-Mar-2011.

  12. Antony George Fernando A, Arun kumar D, Mohanraj D,Ramesh B,Rajesh kannan A,MuthuKumar V, Suresh babu A, "A study on mechanical properties of natural fiber reinforced laminates of epoxy (LY 556) polymer matrix composites" presented in a International level conference on APM 2011, organised by CIPET, Chennai, India from 25-Mar-2011 to27-Mar-2011.

  13. S.Jeyan,K. Jagan, K. Nithin, R.Bhaskar,R.Parthiban, V. Muthukumar, Suresh babu A, "A study on abrasive behaviour of Aluminium-Silicon carbide (Al(LM4)-SiC) Metal Matrix Composites" presented in a International level conference on APM 2011, organised by CIPET, Chennai., India from 25-Mar-2011 to 27-Mar-2011.

  14. Jeyan S, Muthukumar V, Venkatasamy R ,Suresh babu A, "Parametric optimization of WEDM process" presented in a International level conference on APM 2012, organised by CIPET Ahmedabad, India from 10-Feb-2012 to 12-Feb-2012.

  15. Selwyn Jebadurai, Suresh Babu A, "Influence of functionalized multiwalled CNT on Mechanical Properties of Glass Fiber reinforced Polyester Composites" presented in a International level conference on INCRAME 2012, organised by Dr.M.G.R Educational and Research Institute, Chennai., India from 19-Apr-2012 to 20-Apr-2012.

  16. Muthukumar V, Venkatasamy R, Rajesh N, Venkatesh A P, Suresh babu A, "Synthesis and characterisation of Al-B4C Metal Matrix Nano Composite(MMNC)" presented in a International level conference on APM 2013, organised by CIPET, Lucknow, India from 01-Mar-2013 to03-Mar-2013.

  17. Muthukumar V, Venkatasamy R,Rajesh N, Venkatesh A P,Suresh babu A, "Effect of Approach Angle and Machining Parameters on surface Roughness Parameters in Dry Machining of AISI1045 steel" presented in a International level conference on ICADMS 2013, organised by Saveetha University, India from 21-Mar-2013 to 22-Mar-2013.

  18. Devanathan C,Suresh babu A, "Effect of Plunge depth on friction stir welding of Al 6063"presented in a International level conference on Advanced Manufacturing and Automation, organised by Kalasalingam University, India from 28-Mar-2013 to 30-Mar-2013.

  19. Allen Jose ,A.Suresh babu , C.Devanathan “Online surface Detection in friction stir welding" presented in a International level conference on ICSSEE,ICMSC,ICFIE, organised by IT Society of India, Coimbatore, India from 21-Apr-2013.

  20. Allen Jose ,A.Suresh babu , V.S.Senthilkumar, "Analysis of Acoustic signals in friction stir welding" presented in a National level conference on NCETC2013, organised byGCE, Thrissur, Kerala., India from 13-Jun-2013 to 15-Jun-2013.

  21. Ajid Damodaran,Mansour H,Lessard L , Seavone G, Suresh babu A, "Design, Manufacturing and Testing of a cylindrical drum shell using a sandwich structure" presented in a International level conference on The 19th International conference on Composite Materials(ICCM19),organised by International Committee on Composite Materials, Canada from 28-Jul-2013 to02-Aug-2013.

  22. Veenaraja D,Muthukumar V, Venkatasamy R, Dharmendhirakumar M, Suresh babu A, Senthilkumar N, "Impact of Machining Parameters on the EDM Process Responses:A Taguchi Approach for Al-SiC MMC" presented in a International level conference on 4th Nirma University International Conference Engineering (NUiCONE 2013), organised by Nirma University, Ahmedabad, India from 28-Nov-2013 to 29-Nov-2013.

  23. Suresh babu A,Muthukumar V,Venkatasamy R, Antony George Fernando A, "An Accelerated particle swarm optimization algorithm on parametric optimization of WEDM of Die-Steel" presented in a International level conference on 28th Indian Engineering Congress , organised by The Institution of Engineers(India), India from 20-Dec-2013 to 22-Dec-2013.

  24. Muthukumar V, suresh babu A, Senthil Kumar N, Venkatasamy R, "Comparative Machinabilityinvestigation of Advanced Materials during WEDM Process" presented in a International level conference on 28th Indian Engineering Congress , organised by The Institution ofEngineers(India), India from 20-Dec-2013 to 22-Dec-2013.

  25. Arun kumar N.E,Suresh babu A, "Parametric Analysis and Optimization of Wire Electric Discharge Machining of Beriliyum copper Alloy" presented in a International level conference on Second International Conference on Advances in Industrial Engineering Applications(ICAIEA 2014), organised by Anna University Chennai, India from 06-Jan-2014 to08-Jan-2014.

  26. Kalyan Kumar R, Suresh Babu A, "Evaluation of Mechanical crimping process using Finite Element Analysis" presented in a International level conference on First International Conference on Structural Integrity (ICONS 2014), organised by IGCAR, Kalpakkam, India from04-Feb-2014 to 07-Feb-2014.

  27. Arun Kumar N E, Suresh babu A, "Parametric study along with selection of optimal solutions in wire cut machining of Titanium(Gr2) " presented in a International level conference onICRAMID-2014, organised by Ponjesley College of Engineering, India from 07-Mar-2014 to08-Mar-2014.

  28. Muthukumar V,Rajesh N,Venkatasamy A, Suresh babu A, Senthilkumar N, "Mathematical Modeling for Radial Overcut on Electrical Discharge Machining of Incoloy 800 by Response Surface Methodology " presented in a International level conference on 3rd International Conference on Material Processing and characterisation(ICMPC 2014) , organised by GRI Inst of Engg &Tech, Hyderabad, India from 08-Mar-2014 to 09-Mar-2014.

  29. Devanathan C, Suresh babu A, "Friction Stir Welding of Metal Matrix Composite using Coated tool " presented in a International level conference on 3rd International Conference on Material Processing and characterisation(ICMPC 2014), organised by GRI Inst of Engg &Tech, Hyderabad, India from 08-Mar-2014 to 09-Mar-2014.

  30. Veenaraja D,Muthukumar V, Venkatasamy R, Dharmendhirakumar M, Suresh babu A, Senthilkumar N, "Surface Roughness Analysis and Optimization of EDM Machining Parameters in Machininig Al/SiC MMC by Taguchi Method" presented in a International level conference on International Conference on Modelling Optimization and Computing(ICMOC2014), organised by NICHEM Kumaracoil, Thuckalay, India from 10-Apr-2014 to 11-Apr-2014.

  31. Rama Manivannan, Suresh babu A, "Influence of trapezoidal shear keys on the mechanical properties of PVC foam cored Sandwich Composite Marine Structure " presented in a International level conference on International Conference on Modeling, Optimization and Computing (ICMOC 2014), organised by Noorul Islam University, Kumarakoil, India from10-Apr-2014 to 11-Apr-2014.

  32. N.E.Arun Kumar & A.Suresh Babu., "Modelling The Process Parameters Of Wire Electrical Discharge Machining Of Zirconium Copper Alloy Using RSM" presented in a International level conference on International Conference On Modeling Optimization And computing 2014(ICMOC 2014), organised by NICHE, Kumaracoil, Thuckalay, India from10-Apr-2014 to 11-Apr-2014.

  33. Amal V Dom,Suresh babu A, Ajith James Jose, "Fabrication ad study of Impact Energy Absorbtion capability of ABS(Acrylonitrile butadine styrine) and polycorbonate nano composites" presented in a International level conference on ICRTEM 2014, organised by Indra Ganeasn College of Engineering ,Tiruchirappalli, India from 11-Apr-2014 to 12-Apr-2014.

  34. Sugumar M, Suresh babu A, "A study on Charactersitcs of Geo Polymer composites"presented in a International level conference on SET 2014, organised by VIT University, Indiafrom 06-May-2014 to 07-May-2014.

  35. Ajith.D,L.Lessard, Suresh babu A, "Application of Composite materials to Indian MusicalInstruments" presented in a International level conference on International Colloquium on Materials ,Manufacturing and Metrology, organised by IITM,Chennai, India from 08-Aug-2014 to 09-Aug-2014.

  36. T.T. Nagarajan,Suresh babu A, Palanivelu K "Mechanical and Thermal Properties of Pineapple Leaf Fiber Reinforced with Epoxy Composites" presented in a International level conference on Third International Conference on Polymer Processing ad Characterization (ICPPC 2014), organised by Mahatma Gandhi University ,Kottayam, India from 11-Oct-2014 to 13-Oct-2014.

  37. Suresh babu A, Jacob Moses "Preparation and Characterization of Polyvinylbutryal (PVB) Industrial leather waste Polymer composites" presented in a International level conference on Third International Conference on Polymer Processing ad Characterization(ICPPC 2014), organised by Mahatma Gandhi University ,Kottayam, India from 11-Oct-2014 to13-Oct-2014.

  38. Suresh babu A, Anandakumar S,Saravanan R , "Mechanical performance study on polymer nano Composites manufactured using compression molding Process and vacuum resin infusion process" presented in a International level conference on Third International Conference on Polymer Processing ad Characterization (ICPPC 2014), organised by Mahatma Gandhi University ,Kottayam, India from 11-Oct-2014 to 13-Oct-2014.

  39. Jaivignesh M, Dhanalakshmi S, Suresh babu A, Shanmugasundaram K, "Microstructural and Mechanical behaviour of Aluminium Matrix composites reinforced with coated SiC particles fabricated by Stir Casting" presented in a International level conference on Advances in Materials and Manufacturing Engineering(ICAMME'14), organised by Sairam Group of Institutions, India from 19-Dec-2014 to 20-Feb-2014.

  40. Jaivignesh M, Dhanalakshmi S, Suresh babu A, Shanmugasundaram K, "Evaluation of Mechanical properties of Al 2014- coated and uncoated SiC metal matrix composites" presented in a International level conference on Advancements in Polymeric Materials(APM2015, organised by CIPET Chennai and IISc Bangalore, India from 20-Feb-2015 to22-Feb-2015.

  41. Nagarajan T.T, Jagannadham Kumar, Suresh babu A, Bhaskar A, "Thermo Mechanical Properties of Abaca fiber/PP/ABS composites" presented in a International level conference onAdvancement in Polymeric Material(APM 2015), organised by CIPET chennai, IISc Bangalore, India from 20-Feb-2015 to 22-Feb-2015.

  42. A.Jacob Moses, A.Suresh Babu, S.Ananda Kumar, "Fabrication and Characterization of Leather waste and LDPE/LLDPE blend Composites" presented in a International level conference on International Conference on Advances in Production and Industrial Engineering2015, organised by NIT Trichy, India from 20-Feb-2015 to 21-Feb-2015.

  43. M.Athimoolam,Logeshkumar,Suresh Babu A, "Tensile Behaviour of Nanoparticle Reinforced Epoxy- Polyurethane Composite Water Pipeline" presented in a International level conference on International Conference on Mechanical and Manufacturing Engineering (ICMME-2015), organised by Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya, SCSVMV University, India from 02-Apr-2015 to 03-Apr-2015.

  44. A.Suresh babu, M.Haribabu , "Joining AI5083 Reinforced with B4C Composites by Friction Stir Welding with Different tool Pin Profile" presented in a International level conference on Advances in Materials , Manufacturing and Applications(AMMA 2015), organised by NIT, Trichirappalli, India from 09-Apr-2015 to 11-Apr-2015.

  45. Karthikeyan M,Suresh babu A, Nagarajan T T,"Effect on Nano-TiO2 reinforced with PP/ABS Matrix based Composite by injection Moulding " presented in a International level conference on Advances in Materials , Manufacturing and Applications(AMMA 2015), organised by NIT, Trichirappalli, India from 09-Apr-2015 to 11-Apr-2015.

  46. Saravanan M, Suresh babu A, "Parametric optimization of increasing corner accuracy in WEDM on Inconel625" presented in a International level conference on International Conference on Recent Advancement in Mechanical Engineering & Technology(ICRAMET 15), organised by Aarupadai Veedu Institute of Technology (AVIT),Chennai, India from 23-Apr-2015 to 24-Apr-2015.

  47. Devanathan C, A.Suresh Babu, B. Dominic Roystan and M.S.Balaguru, "Effect of tool rotational speed on mechanical properties of aluminium matrix composites welded by friction stir welding" presented in a International level conference on International Conference on Advances in Applied Engineering and Technology – 2015(ICAAET-2015), organised by Syed Ammal Engineering College, Ramanathapuram - 623502, India from 14-May-2015 to 16-May-2015.

  48. M.Omkumar, A.Suresh babu, A.Jacob Moses, "Preparation and Characterization of Leather Polymer Composites" presented in a International level conference on 20th International Conference on Composite Materials(ICCM 20), organised by International Committee of Composite Materials, Denmark from 19-Jul-2015 to 24-Jul-2015.

  49. A. Suresh Babu, M. Jaivignesh*, S. Dhinakaran, S. Vengatesan, C. Vimal Prakash, R. Divakaran Ramasamy, T.V Moorthy,"Experimental Investigation of Al (2014) – Nickel Coated Alumina Metal Matrix Composites Fabricated by Stir Casting", International Conference on Materials, Design, and Manufacturing Process (ICMDM) 2016,India, 17-2-2016 to 19-2-2016

  50. Athimoolam.M, T.V.Moorthy, A.Suresh Babu and Logesh Kumar, "Compression test on Epoxy-Polyurethane blended resin, with nanoclay reinforced composite pipeline and Finite Element Analysis" presented in a International level conference on International Conference on Mechanical, Materials and Manufacturing Systems (ICMMMS’16), organised by Sri Sairam Engineering College, India from 24-Feb-2016 to 25-Feb-2016. 86.

  51. Athimoolam. M, Moorthy. T.V , Suresh babu. A, "Empirical Modeling and Experimental Investigation of the Amine Treated Nanoclay Reinforced Epoxy-Polyurethane Blended Resin Composites" presented in a International level conference on International Conference on Civil, Mechanical and Environmental Engineering Technologies (ICCMEET 2016), organised by SVS College of Engineering, Coimbatore, India from 26-Feb-2016 to 27-Feb-2016.

  52. Suresh Babu A, Koushik T , Jaivignesh M, Tulasiram C , Balamurali Nishok , Mohan Kumar K, "Effects of reinforcements on sliding wear behaviour of Al alloy(LM-16)" presented in a International level conference on IVth International Conference on Production & Industrial Engineering (CPIE-2016), organised by Dr B R Ambedkar National Institute of Technology, Jalandhar , India from 19-Dec-2016 to 21-Dec-2016. 

  53. A. Suresh Babu, M. Jaivignesh ,, "A Study on Mechanical Properties of Biaxial and Hybrid Carbon Fibre for Application in Aerospace Antenna" presented in a International level conference on International Symposium for Research Scholars 2016 (ISRS -2016), organised by IITM Chennai, India from 21-Dec-2016 to 23-Dec-2016.

  54. Suresh babu A, Jaivignesh M, Dhinakaran S, Vengatesan S, Vimal Prakash C, Divakaran Ramasamy R, "Effect of Equal channel Angular Pressing on microstructure and hardness of Al(2014)-Nickel coated alumina composites" presented in a International level conference on Internal conference on Emerging Trends in Materials & Manufacturing Engineering (IMME17), organised by National Institute of Technology,Tiruchirappalli, India from 10-Mar-2017 to 12-Mar-2017.

  55. Suresh babu A, Prasanna Kumar P, Jaivignesh M, Sugavaneswaran M, Arumaikkannu G , "Numerical Simulation of the effect of Relative Density on the toughness of random pored cellular structures" presented in a International level conference on International Conference on Recent Innovations in Production Engineering(RIPE-2017), organised by MIT Chennai, India from 24-Mar-2017 to 25-Mar-2017.

  56. C Devanathan, A Suresh Babu and E Shankar, "Friction Stir Welding of Aluminum alloys using Coated and Non Coated Tool " presented in a International level conference on International Conference on Advances In Materials, Manufacturing and Applied Science (ICAMMAS'17), organised by Sri Sai Ram Institute of Technology, Chennai, India from 30-Mar-2017 to 31-Mar-2017.

  57. Jaivignesh M, Suresh Babu A, Sasidharan T, Arumaikkannu G , "Investigation on Flexural Behaviour of Ti64 Cellular Structures Fabricated by Direct Metal Laser Sintering for Mandibular Implant" presented in a International level conference on International Conference on Manufacturing Technology and Simulation (ICMTS - 2017) , organised by IITM,Chennai, India from 07-Jul-2017 to 08-Jul-2017.

  58. Suresh Babu A,Binish K M, Jaivignesh M, Sugavaneshwaran M, "Modelling of Functional Gradient Porous Structure and Its Fabrication using Additive Manufacturing Process" presented in a International level conference on International Conference on Advances in materials and Manufacturing Applications(IConAMMA), organised by Amritha Vishwa Vidyapeetham University, India from 17-Aug-2017 to 19-Aug-2017.

  59. Suresh babu A, Jaivignesh M , Dhanalakshmi S , Shanmuga Sundaram K, "Microstructural Refinement and Enhancement of Mechanical properties of Al (2014) – SiC Composites by Equal Channel Angular Pressing" presented in a International level conference on 21st International Conference on Composite Materials (ICCM21), organised by International Committee for Composite Materials, China from 20-Aug-2017 to 25-Aug-2017.

  60. Omkumar M, Selvakumar K,Suresh Babu A, "Effect of drilling parameters on surface quality of natural fiber reinforced polymer composites" presented in a International level conference on 21 st International Conference on Composite Materials (ICCM 21), organised by International Committee for Composite Materials, China from 20-Aug-2017 to 25-Aug-2017.

  61. Suresh Babu, M, Jaivignesh, R. Subramanian, M. P. Dilipkumar, R. Loganathan and S. Vijayakumar, "Topological Optimization Of Direct Metal Laser Sintered Ti64 Dental Implants" presented in a International level conference on 10th International Conference On Precision, Meso, Micro and Nano Engineering,COPEN10 2017, organised by IITM,Chennai, India from 07-Dec-2017 to 09-Dec-2017.

  62. Jaivignesh M, Suresh babu A, on First International Conference on Modern Innovations in Nano Technology-Science and Engineering of Materials, organised by Annamalai University, India from 01-Feb-2018 to 02-Feb-2018

  63. Arivukkarasan S..Stalin B.,Suresh Babu A., Pandiyarajan M., "Analysis on Mechanical Behaviour of Binary and Hybrid Al 2014 Metal Matrix Composites" presented in a International level conference on International Conference on Advances in Manufacturing Technology (ICAMT 2018), organised by Chennai Institute of Technology, Chennai-600069, India from 22-Jun-2018 to 23-Jun-2018.

  64. Jaivignesh M. , Suresh Babu A. , Arumaikkannu G. , "In-vitro Biocompatibility Study of Additive Manufactured Titanium Cellular Structures for Mandibular Implants" presented in a International level conference on International conference on BioMaterials, BioEngineering, and BioTheranostics(BIOMET 2018), organised by VIT,Vellore, India from 24-Jul-2018 to 28-Jul-2018.

  65. Suresh babu A, Jaivignesh M, Srinivasn S, Sugavaneswaran M, "Design of Functional Gradient Porous Structures and its Fabrication using DMLS Process" presented in a International level conference on International Conference on "Advances in Materials and Manufacturing Applications (IConAMMA 2018), organised by Amrita School of Engineering, Bengaluru Campus, India from 16-Aug-2018 to 18-Aug-2018.

  66. Suresh babu A, Gowthamraj S,Jaivignesh M, Srinivasn S, "A comparative Study on Mechanical Properties of Kenaf fibre- reinforced polyester composites prepared by VARI,RTM, and CM techniques" presented in a International level conference on International Conference on "Advances in Materials and Manufacturing Applications (IConAMMA 2018), organised by Amrita School of Engineering, Bengaluru Campus, India from 16-Aug-2018 to 17-Aug-2018.

  67. Jaivignesh M,Suresh babu A, Arumaikkannu G, "Effect of Pore Orientation on Flexural Strength of Ti64 Cellular Structure Fabricated by DMLS Process for Mandipular Implant" presented in a International level conference on International Conference on 3D Printing & Additive Manufacturing Technologies-AM 2018, organised by Additive Manufacturing Society of India, India from 07-Sep-2018 to 08-Sep-2018.

  68. Suresh Babu A, Jaivignesh M, Poovarasan D, "Mechanical And Crystallization Behaviour Of Sisal Fiber And Talc Reinforced Polylactic Acid Composites" presented in a International level conference on 7th International And 28th All India Manufacturing Technology, Design And Research Conference 2018 (AIMTDR 2018), organised by Anna Univeristy, India, India from 13-Dec-2018 to 15-Dec-2018.

  69. Jaivignesh M,Suresh babu A, Arumaikkannu G,"In-vitro Analysis of Titanium Cellular Structures Fabricated by Direct Metal Laser Sintering" presented in a International level conference on International Conference on Materials, Manufacturing and Modelling (ICMMM) , organised by School of Mechanical Engineering , VIT University, Vellore in association with American Society of Mechanical Engineers Chapter-VIT , Zhengzhou Univer, India from 29-Mar-2019 to 31-Mar-2019.

  70. Raja Velusamy, Suresh Babu Annamalai, Mangudi Rangawamy Swaminathan, Hariharan Periyana Pillai, Sakthinathan Ganapathy, Vignesh Radhakrishnan PhD, Premkumar Kumar,"Experimental investigation on the effect of natural based additives on single-cylinder DI diesel engine",SAE Technical Paper 2021-28-0130, 2021,Thermal Management Systems Conference 2021, SAE International, https://doi.org/10.4271/2021-28-0130ISSN: 0148-7191,e-ISSN: 2688-3627.

  71. Raja Velusamy, Mangudi Rangaswamy Swaminathan, Hariharan Periyana Pillai, Suresh Babu Annamalai, Sakthinathan Ganapathy, Dhanalakshmi Sathishkumar, Kumarasamy Annamalai, Natarajan Venkat, Vignesh Radhakrishnan PhD, Naveen Kumar Kumaran, Gnanaeshwar Sharma,"Effect of Single Layer Thin Film Thermal Barrier Coatings on Mechanical, Thermal and Tribological Characterization of Cast Iron (GJL 300)",SAE Technical Paper 2021-28-0285, 2021,International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility,https://doi.org/10.4271/2021-28-0285,ISSN: 0148-7191,e-ISSN: 2688-3627.

National Conferences
bottom of page